SPECIFICATIONS

• Cutting Edge Embedded Technology.
• Excellance Awards Winner - KioskCom 2004 show in USA .
• Chosen by OEMs such as - NCR, EloTouch, Marconi BritishTelecom etc.
• Unlimited touches life expectancy. No moving parts.
• High Light Transmission- 91%.
• Durability & Resistance to Vandalism: Shock, Scratch and Vandal resistant.
• Debris resistant - Impervious to surface contaminants such as dirt, grease and moisture/ rain water / ice snow.
• Moisture: Touch panel unaffected by severe levels of moisture or water droplets on the surface.
• Chemicals: Performance unaffected by cleaning solutions.
• "Through Glass" feature - can work through shop glass windows or through a piece of sacrificial glass placed in front of the touch sensor, the software has an adjustment for sensitivity. Through Glass Feature is great for Banks, Retail Showroom Windows: The additional piece of glass -thermally toughened, minimum 3mm upto 20mm thick - can also act as an anti-vandal protective layer, so that in the event of breakage, only it needs to be replaced and not the entire touchscreen.
• The 3mm glass on the sensor is anti-glare and thermally toughened which passes the 25mm steel ball bearing drop test.
• Sealability: NEMA 12, NEMA 4 compliant.
• High Touch Resolution: 4096X4096.
• The Zytouch takes the first touch only and does not average like "other Capacitive", which can be dangerous as multiple simultaneous touches may trigger the wrong button actions.
• Does not use a surface coating like "other Capacitive", instead uses a Micro-fine wire of 10 Microns set in a special pattern, and there is no yellowish tint like with "other Capacitive".
• Does not suffer from drift like "other Capacitive" and this makes the ZyTouch very robust. No re-calibration required as it uses fixed wires to ensure zero drift over time with absolutely no need for maintenance.
• The controller is built (embedded) directly into the glass, so no extra wiring and the power is sourced through the RS232/USB port itself.
• In India , priced much lower than "other Capacitive" touchscreens.
• Wide range of Sizes available: 7" upto 22".
  
  

For use in extreme harsh outdoor environments like ATMs, Robust Outdoor Public Access Kiosks, Web phones, Banking, Medical displays, self service, industrial environments & unattended public access applications.

Unlike other touchscreens using a normal capacitive system where the sensing medium is on the surface of the touch panel, the active component of the superior ZYTOUCH sensor is embedded inside the 3mm glass for protection and can be up to 20mm from the touch surface.

The touchscreen works by sensing capacitance. When you place a finger on or near to the Touch sensor, a capacitance forms between your finger and the wires on the sensor grid. The controller senses changes in the capacitance on the sensor wires, this change is given as a finger position.

Works through a protective layer of glass (can have unique applications such as "touchscreen tabletops" or "through glass option for showroom windows /ATMS". This means that even if the outer layer of glass is vandalised the touchscreen operation is unaffected.

You're welcome to visit us. We can prove in our test lab our claims over other "competing big name Capacitive brands".

Standard Warranty 3 yrs. Extended warranty upto 5yrs.

Realistic prices for Indian market with no superficial or bloated prices and claims like "other big brands".

Sizes & Types of Touch Display options integrated with ZT?

• Flat CRT: 17"
• Open frame LCD: 8.4, 10.4", 12.1", 15", 17", 19", 21".
• Rear/Panel Mount Metal Cased LCD monitors (IP6x, Nema 4/12 supported): 15", 17", 19", 21".
  
  

A Note about Traditional Capacitive Touchscreens eg. "other brand Capacitive":

1. Are not suited to external applications, as the surface of the screen is prone to damage by scratching, which has a direct impact on performance (cursor accuracy and calibration).
2. Maintenance of normal capacitive touchscreens can be a problem as they require frequent re-calibration due to changes in temp., humidity or a power grounding problem.
3. They only work with a conductive, grounded pointing device (an uncovered finger) and are therefore unsuited to many applications where gloved fingers would be used.
4. Need to be used with proper grounded power source which is not always available in our country.
5. Low touch resolution of 1024X1024.
6. Not recommended in locations where metal enclosures and any kind of magnetic or electrical interference is present.
   
   

After local testing in India our valued customers observations are:

With ordinary"other brand Capacitive" non-Projected Capacitive touchscreens, the applied coatings & layers degrade & wear out over time. Try using sand paper, keys or a coin to scratch through the surface coat. Once you get into the conductive layer the touchscreen will cease to work in that location. Also frequent re-calibration is required as it loses it's stability & accuracy due to changes in environment for eg. temp. or the user's body capacitance & it does not work at all with a gloved finger or stylus. Once damaged it cannot be repaired and has to be replaced. Warranty does not cover any damage to the touchscreen.

SPECIFICATIONS

ELECTRICAL

• Technology: Projected Capacitive.
• Connectivity: USB v1.1, USB 2.0 compatible.
• Power: <100mA from 5V USB.
  
  

PERFORMANCE CRITERIA

• Positional Accuracy <1.5% of reported position in recommended viewing area.
• Calibration Drift Fixed embedded technology, non-contact with active sensor, zero moving parts.
• Abrasion Resistance: Glass, unaffected by surface scratching.
• Chemical Resistance: Glass, unaffected by cleaning solutions.
  
  

MECHANICAL

• Stylus Type: Finger, glove operable.
• Sensor Thickness: 3mm/7.8mm.
  
  

OPTICAL

• Light Transmission ~ 91%.
• Surface Finishes: Standard 140 gloss anti-glare etch.
• Other finishes available upon request.
  
  

• EMC: CE, FCC-B (when fully integrated into final product)
• Safety: Laminated glass assembly complies with EN60950, UL60950, UL544.
• Vibration/Shock: In accordance with UL291 when installed in a suitable correct bezel.
• NEMA: Sealable to NEMA 12, NEMA 4.
• Operating: (-35°C to +65°C).
• Storage: (-40°C to +70°C).
• Humidity: 0 to 90% RH @ 40ºC, unaffected by condensation.
• Water: Resistant to water droplets on the surface
• Weather: Resistant to snow, ice, rain, sleet, hail, wind, etc.

It is a touch sensor incorporating an integrated rear projection surface intended for use with a
projector (No LCD required).

Primarily intended for use in large format interactive digital signage and information systems
found in applications such as retail, advertising and exhibitions.

The associated electronic controller effectively divides the sensor into pixel-sized sensing cells,
using an array of microfine metal track electrodes, which are not ITO (Indium Tin Oxide) based,
and are virtually invisible when in front of a powered display or rear projection film. These tracks
are connected to the electronic controller board, and an oscillation frequency is established for
each track. Using the theory of capacitance field effect, a touch on the overlay substrate to which
the sensor is mounted causes a change in the oscillating frequency of the tracks around that
particular point; the position of which is then determined by the driver software. Unlike conventional capacitive systems where the operator touches the actual conducting surface of the
sensor, the active component of the flexible film touch sensor is embedded within the sensor and
protected by the mounting substrate.

The driver software allows the touch screen to interface with the host computer’s operating
system by emulating the behavior of a computer mouse, and translates touches into mouse
movements and clicks.

The flexible film touch sensor are available with various surface preparations to facilitate bonding to the supporting substrate or window. Guidelines on the application these to a supporting substrate are available upon request.

Film Sizes: 15", 17", 19", 23", 26" , 30"
With opaque rear projection film laminated mounted on rear surface of touch foil: 30", 32", 37", 40", 42" , 45", 50", 56", 60", 67"

SPECIFICATIONS